 |
|
|
6
Ways to Install Your Franklin Gas Stove
Surprisingly
simple and inexpensive, your Woodstock Soapstone
direct vent gas fireplace can be installed almost
anywhere and easily vented through a wall or a roof.
Whether you do it yourself or use an outside installer,
our expert and experienced staff can provide everything
from the vent pipe and parts to helpful advice. Just
ask if you have questions.
Use
this chart to select which installation kit you will
need. Select the option that is closest to your situation
(i.e. through a wall or roof, straight back, or up
and out, etc.), then determine the venting components
and lengths of pipe you'll require. That's it...you're
ready to order!
TOLL FREE 1-800-866-4344 Mon-Sat. 9-5 EST. Click
on the image below that best matches your situation.
|
|
UP
AND OUT
This is the most common installation. You may want to adjust
the amount of pipe depending on the height at which the
pipe goes through the wall and the distance from the back
of the stove to the wall.
| INCLUDES: |
SAMPLE
KIT |
YOUR
KIT |
• 1
- 90o Elbow(Swivel) |
$58.00 |
$_________ |
• 1
- 90o Elbow(Swivel same as A) |
$58.00 |
$_________ |
2
- 24" Length (Black) @$51.00/ea |
$102.00 |
$_________ |
• 1
- Wall Thimble |
$35.00 |
$_________ |
• 1
- Wall Thimble Cover |
$45.00 |
$_________ |
• 1
- Horizontal Vent Cap |
$150.00 |
$_________ |
1
- 11"-14" Adj. Pipe Black |
$67.00 |
$_________ |
| STANDARD
RETAIL TOTAL |
$515.00 |
**$________ |
** Deduct 10% from
total kit price if kit is shipped with your stove
• Required for this installation
|
|
|
STRAIGHT
BACK with SNORKEL
This option is often the choice of customers who prefer
not to see the vent pipe. The length of black pipe will
depend on the distance from the stove to the wall. The "snorkel" is
the piece on the outside wall, and is necessary to get
enough rise to create adequate draft in all weather conditions.
** Deduct 10% from total kit price
if kit is shipped with your stove
• Required
for this installation |
|
|
STRAIGHT
UP
The vent pipe can rise up to a maximum of 24' in height.
This option is a good alternative when it is not possible
to terminate the vent pipe by going through a wall. The
vent pipe must be galvanized above a roof or ceiling
(to protect from rust and corrosion). Two samples kits
are listed below
one with a 24' cathedral ceiling, and another where the
pipe goes through a flat ceiling and an attic space.
Note:
Unlike woodstove
chimneys, direct vent pipe extends above the roof only
12-24", depending on roof pitch.
A.
24' CATHEDRAL CEILING (ILLUSTRATED ABOVE)
| INCLUDES: |
SAMPLE
KIT |
YOUR
KIT |
| •1
- 90 Elbow Swivel Black |
$58.00 |
$_________ |
4
- 48" Pipe Black @ $78.00/ea  |
$312.00 |
$_________ |
1
- 36" Pipe Black  |
$65.00 |
$_________ |
•1
- 24" Pipe Galvanized  |
$35.00 |
$_________ |
•1
- Roof Flashing  |
$26.00 |
$_________ |
•1
- Support Box  |
$59.00 |
$_________ |
•1
- Vertical Vent Cap  |
$58.00 |
$_________ |
•1
- Storm Collar  |
$8.00 |
$_________ |
| STANDARD
RETAIL TOTAL |
$621.00 |
**$_________ |
B.
FLAT 8' CEILING -16' TOTAL (NOT SHOWN)
If
you have a flat ceiling with an open airspace (or attic)
above, this is the kit you will need. Be sure to measure
the height to the ceiling and the height above the
ceiling to order the correct amount of pipe. All pipe
above the ceiling must be galvanized.
| INCLUDES: |
SAMPLE
KIT |
|
YOUR
KIT |
| •1
- 90 Elbow Swivel Black (A) |
$58.00 |
$_________ |
| 1
- 48" Pipe Black(J) |
$78.00 |
$_________ |
| 1
- 24" Pipe Black (C) |
$51.00 |
$_________ |
| •1
- Thimble Cover(E) |
$45.00 |
$_________ |
| 2
- 48" Pipe Galv(Y) @ $52.00 ea |
$104.00 |
$_________ |
| •1
- 24" Pipe Galvanized (L) |
$35.00 |
$_________ |
| •1
- Roof Flashing (M) |
$26.00 |
$_________ |
| •1
- Vertical Vent Cap (O) |
$58.00 |
$_________ |
| •1
- Storm Collar (P) |
$8.00 |
$_________ |
| STANDARD
RETAIL TOTAL |
$463.00 |
**$_________ |
** Deduct 10% from total kit price
if kit is shipped with your stove
• Required for this installation
|
|
|
INTO
AN EXISTING FIREPLACE
This option includes two separate 3" pipes which go up
the fireplace chimney: one pipe is for stove exhaust, and
the other is to bring in combustion air for the stove.
Adaptors are included for the back of the stove and the
top of the chimney. Chimneys up to 16' tall can be outfitted
with two 3" pipes.
A.
UP TO 16' TALL CHIMNEY
WITH TWO 3" CO-LINEAR DUCTS (ILLUSTRATED BELOW)
•1
- Coaxial/Colinear Box 3"/3" |
$91.00 |
$_________ |
•1
- 3" Flex X 35' |
$109.00 |
$_________ |
•1
- Chimney Termination Kit |
$120.00 |
$_________ |
| •1
- Chimney Cap |
$58.00 |
$_________ |
| STANDARD
RETAIL TOTAL |
$378.00 |
**$_________ |
Chimneys
above 16' tall require a 3" exhaust and a 4" air
intake (the extra size on the air intake reduces
the possibility of any restriction in the combustion
air flow).
B. 16' - 24' CHIMNEY
WITH 3" AND 4" CO-LINEAR DUCTS (NOT SHOWN)
INCLUDES:
SAMPLE KIT YOUR KIT
| •1
- CoLinear/CoAxial Box 3"/4" (W) |
$91.00 |
$_________ |
| •1
- 3" Flex X 35' (R) |
$109.00 |
$_________ |
| •1
- 4" Flex X 35' (U) |
$154.00 |
$_________ |
| •1
- Chimney Termination Kit (S) |
$120.00 |
$_________ |
| •1
- Chimney Termination Cap (O) |
$58.00 |
$_________ |
| STANDARD
RETAIL TOTAL |
$532.00 |
**$_________ |
** Deduct 10% from total kit price
if kit is shipped with your stove
• Required
for this installation |
|
|
INTO
MASONRY CHIMNEY UP TO 24' TALL
Here you can use an existing woodstove hearth and chimney.
A single exhaust duct is installed inside the chimney.
Combustion air comes down the chimney around the exhaust
duct. Adaptors at the top and
bottom of the chimney keep the air intake and exhaust separate.
|
|
|
INTO
EXISTING PREFAB CHIMNEY UP TO 24' TALL
This option allows you to use an existing prefabricated
chimney rather than a masonry chimney (see Installation
5.). The conversion kits at the top and bottom of the chimney
are designed for prefabricated chimneys rather than
masonry chimneys. Call our staff for details on compatibility.
| INCLUDES: |
SAMPLE
KIT |
YOUR
KIT |
| •1
- 90 Elbow Swivel Black |
$58.00 |
$_________ |
| 1
- 48" Pipe Black |
$78.00 |
$_________ |
1
- 17"-24" Adj. Pipe Black |
$81.00 |
$_________ |
•1
- Chimney Conversion Kit |
$146.00 |
$_________ |
•1
- 4" Flex X 35' |
$154.00 |
$_________ |
| •1
- Chimney Termination Cap |
$58.00 |
$_________ |
| STANDARD
RETAIL TOTAL |
$575.00 |
**$_________ |
** Deduct 10% from total kit price
if kit is shipped with your stove
• Required for this installation
Remote
Control/Timer/Thermostat
You can turn the stove on and off manually or
with a timer, and adjust the heat output with
a digital thermostat. For example, you can set
the stove to come on before you come home at
4:00 pm, bring the temperature up to 70 o,
and then go off at 10:00 pm when you go to bed.
Battery operated.
Remote
Control ........................$90.00 |
|
|
|
|
| |
|
|
| |
|
|
|
|
Soapstone
Click
here 
Click
here