Keystone & Palladian Combuster Cleaning


{besps_c}0|01-202-204-tools.jpg|Assemble Tools: 5/32 inch allen wrench, 1/2 inch|wrench, & 7/16 inch wrench & socket or nut driver{/besps_c} {besps_c}0|02-dsc-0079.jpg|Remove the Cover Plate|using the 5/32 inch Allen Wrench{/besps_c} {besps_c}0|03-dsc-0087jpg|Remove the Heat Shield|Using the 7/16 inch wrench or nut driver{/besps_c} {besps_c}0|04-dsc-0090.jpg|Lift & turn the heat shield|to remove it from the stove{/besps_c} {besps_c}0|05-dsc-53jpg|Remove the shipping bolts with a 1/2 inch wrench|if you have not already done so. These bolts were for shipping purposes ONLY{/besps_c} {besps_c}0|06-dsc-0098.jpg|Lift and turn the catalytic combustor to remove it|{/besps_c} {besps_c}0|07-dsc-0094.jpg|Remove combustor fully for cleaning|{/besps_c} {besps_c}0|08-dsc-0009jpg|Using the shop vac or painters brush|remove the fly ash from both sides of the combustor{/besps_c} {besps_c}0|09-dsc-0014.jpg|Use a shop vac to remove fly ash from the interior|{/besps_c} {besps_c}0|10-dsc-0093.jpg|Return the cleaned combustor to the stove|{/besps_c} {besps_c}0|12-dsc-0104jpg|Replace the heat shield to the combustor assembly|{/besps_c} {besps_c}0|12-dsc-0107.jpg|Replace the cover plate on the stove|{/besps_c}