These are projected dimensions and specifications for our new steel hybrid.  They won’t change much, but as noted below don’t build a hearth or install a chimney thimble based on these specifications.  EPA testing is scheduled to begin in 3 weeks, with UL testing (clearances) following immediately thereafter.


Target Dimensions and Specifications:
Do not build a hearth or chimney until you have confirmed dimensions.  If you do, we are not responsible!

Target Dimensions (Base Model)
Footprint:
25” W x 20” D
Overall (H x W x D):
33.25 x 30” x 27.25 (includes ash lip, skirting, controls)
Flue Size:
6”
Flue Exit:
Top or Rear
Rear Flue Height (Center):
28.25”
Reduced Height Version:
Subtract 2” from overall height and flue height



Target Dimensions (Tall Shaker Version)
Footprint:
27.75” W x 21” D
Overall (H x W x D):
47” x 27.75” x 24”
Flue Size:
6”
Flue Exit:
Top or Rear
Rear Flue Height (Center):
42”

Target Firebox
Advanced Hybrid Design:
Secondary Burn, Catalyst, Aux Air
Firebox Size:
2.5 cu. ft.
Maximum Log Length:
19”
Recommended Log Length:
16”
Door Opening:
12” W x 10”H
Left or Right Loading Door: Left or Right Ash Pan Opening
Firebox Liner:
Soapstone
Draft Control:
Manual (one lever)
Window Size (viewable):
14.5W x 13H
Ash Pan:
Optional
Outside Air Adapter:
Standard

Target Performance

Heat Output (EPA Test Method):
10,000-55,000 BTU/hr
Efficiency:
81% HHV
Emissions (EPA Crib Method):
less than 1.0 gm/hr weighted average or better
Cordwood Emissions (EPA approved method):
less than 1.0 gm/hr weighted average or better
Burn Time:
10-14 Hours




Target Clearances
Rear (no protection):
12”
Rear (with Heat Shield):
6”
Sides (no protection):            
18”